Image 1 of 1
WARNINGS
Consult a Healthcare Professional: Always use this device under the guidance of a healthcare professional. Do not self-diagnose or change medication based solely on readings from this device. A doctor should interpret the readings.
Not for Diagnosis: This device is for monitoring purposes only and is not intended to be a substitute for professional medical advice, diagnosis, or treatment.
Proper Cuff Size is Critical: Using the wrong cuff size can lead to inaccurate readings.
Avoid Repeated Measurements: Do not take measurements too frequently (e.g., wait at least 3-5 minutes between measurements) to avoid arm discomfort.
Interference: Avoid strong electromagnetic fields (e.g., cell phones, microwave ovens) near the monitor during measurement.
Damage: Do not use if the monitor or cuff is damaged.
KEEP OUT OF REACH OF CHILDREN
Battery Safety: Follow instructions for battery insertion and replacement. Dispose of batteries properly.
Cleaning: Instructions for proper cleaning of the device and cuff.
DIRECTIONS
Preparation:
Sit quietly for at least 5 minutes before measurement.
Avoid eating, drinking caffeine, smoking, or exercising for 30 minutes prior.
Sit upright with feet flat on the floor, uncrossed.
Rest the arm on a table so the cuff is at heart level.
Ensure the arm is bare or clothing is loose and not constricting.
Cuff Application:
Apply the cuff to the upper arm according to the clear instructions (e.g., air tube aligned with the middle of the inner arm, cuff snug but not too tight). The bottom edge of the cuff should be about 1 inch (2-3 cm) above the elbow crease.
Measurement:
Press the START/STOP button.
The cuff will automatically inflate and then slowly deflate.
Remain still and silent during the measurement.
The blood pressure and pulse readings will be displayed and announced.